Icom F6400DS 11 - D Transmitting a Call Alert Call

7
NXDN™ OPERATION
7-10
Transmitting a call (Continued)
D Transmitting a Call Alert call
A Call Alert call enables you to notify another user
who may be away from the transceiver that you want
to talk.
<Menu operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD types
(Menu > Signaling/Call > Call Menu)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select “Signaling/Call,”
then push [OK].
3. Push [Up] or [Down] to select “Call Menu,” then
push [OK].
4. Push [Up] or [Down] to select the Individual or
Group ID, then push [OK].
5. Push [Up] or [Down] to select “Call Alert,” then
push [PTT] to transmit the Call Alert call.
L “Success” is displayed after receiving an
acknowledgement from the target station.
L “Failed” is displayed if the target station does not
send back an acknowledgement.
<Key operation>
Portable: For all types
Mobile: For all types
Using [Call Alert]:
Hold down [Call Alert] to transmit the Call Alert call.
L “Success” is displayed after receiving an
acknowledgement from the target station.
L “Failed” is displayed if the target station does not send
back an acknowledgement.
Previous view