Icom F6400DS 11 - D Rewriting the Priority a or B Channel; D Selecting a Continuous Tone Channel

3
BASIC OPERATION
3-5
Selecting a channel (Continued)
D Rewriting the Priority A or B channel
<Key operation>
Portable: For all types
Mobile: For all type
1. Select a channel to be set as the Priority A or B
channel. (p. 3-4)
2. Hold down [Prio A (Rewrite)] or [Prio B (Rewrite)]
for 1 second.
• Sets the selected channel as the Priority A or B
channel.
<Menu operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD type
(Menu > Channel/Scan > Prio A (Rewrite))
(Menu > Channel/Scan > Prio B (Rewrite))
1. Select a desired channel to be set as the Priority
A or B channel. (p. 3-4)
2. Push [Menu] to display the “Menu” screen.
3. Push [Left] or [Right] to select “Channel/Scan,”
then push [OK].
4. Push [Up] or [Down] to select “Prio A (Rewrite)” or
“Prio B (Rewrite).”
5. Push [OK].
• Sets the selected channel as the Priority A or B
channel.
D Selecting a Continuous tone channel
<Key operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD type
1. While in the Analog mode, push [C.Tone CH
Select] to display the “C.Tone CH Select” screen.
2. Push [Up] or [Down] to select a Continuous tone
channel, then push [OK].
• Sets the selected channel.
<Menu operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD type
(Menu > Channel/Scan > C.Tone CH Select)
1. While in the Analog mode, push [Menu] to display
the “Menu” screen.
2. Push [Left] or [Right] to select “Channel/Scan,”
then push [OK].
3. Push [Up] or [Down] to select “C.Tone CH Select,”
then push [OK].
• Displays the “C.Tone CH Select” screen.
4. Push [Up] or [Down] to select a Continuous tone
channel, then push [OK].
• Sets the selected channel.
5. Hold down [Back] for 1 second to return to the
standby screen.
• The selected Continuous tone channel number is
displayed.
Previous view