5
SCAN OPERATION
5-3
<Key operation>
While scanning, push [Scan Start/Stop] to stop a
Scan.
• “ ” disappears. (Depending on the transceiver’s version.)
<Menu operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD type
(Menu > Channel/Scan > Scan Start/Stop)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select “Channel/Scan,”
then
push [OK].
3. Push [Up] or [Down] to select “Scan Start/Stop,”
then
push [OK].
4. Push [Up] or [Down] to select “OFF,” then push
[OK].
• The Scan stops.
• “Scan Start/Stop OFF” is briey displayed.
5. Hold down [Back] for 1 second to return to the
standby screen.
• “ ” disappears. (Depending on the transceiver’s
version.)
Canceling a Scan
To Next Page
Loading...
