Icom F6400DS 11 - D for the Lever Switch (for the Portable Type Transceiver)

2
PANEL DESCRIPTION
2-21
Assignable Software key functions (Continued)
D For the Lever switch (For the Portable type transceiver)
Assignable function
Digital (NXDN) Analog
Conventional
Single-site
Trunk
Multi-site
Trunk
2-Tone 5-Tone LTR MDC
Null (p. 2-22)
✓ ✓ ✓ ✓ ✓ ✓ ✓
Backlight* (p. 2-22)
✓ ✓ ✓ ✓ ✓ ✓ ✓
Lock (p. 2-22)
✓ ✓ ✓ ✓ ✓ ✓ ✓
Scan Start/Stop (p. 2-22)
✓ ✓ ✓ ✓ ✓ ✓ ✓
Talk Around (p. 2-22)
✓ ✓ ✓ ✓ ✓ ✓ ✓
Scrambler/Encryption
(p. 2-22)
✓ ✓ ✓ ✓ ✓ ✓ ✓
Site Lock (p. 2-22)
N/A N/A
✓
N/A N/A N/A N/A
VOX (p. 2-22)
✓ ✓ ✓ ✓ ✓ ✓ ✓
Lone Worker (p. 2-22)
✓ ✓ ✓ ✓ ✓ ✓ ✓
Surveillance (p. 2-22)
✓ ✓ ✓ ✓ ✓ ✓ ✓
Rotary Selector Shift
(p. 2-22)
✓ ✓ ✓ ✓ ✓ ✓ ✓
Individual/Group (p. 2-22)
✓ ✓ ✓
N/A N/A N/A N/A
LCD Mode* (p. 2-22)
✓ ✓ ✓ ✓ ✓ ✓ ✓
✓: Applicable
N/A: Not Applicable
Depending on the transceiver’s model type, some functions may not be assignable.
* For only the Ten-key type or Simple key type transceiver.
One of several functions can be assigned to the Lever
switch.
When the Lever switch is slid to the “
” position, the
assigned function is activated.
When the Lever switch is slid to the “Ο” position, the
assigned function is deactivated.
NOTE: The function that is assigned to the Lever
switch, cannot be assigned to any key.
Transceiver’s top view
“ ” position
Previous view