7
NXDN™ OPERATION
7-22
Deleting the Incoming list
The receive call log can be deleted from the Incoming
list.
<Menu operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD types
(Menu > Signaling/Call > Clear Incoming)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select “Signaling/Call,”
then
push [OK].
3. Push [Up] or [Down] to select “Clear Incoming,”
then
push [OK].
4. Push [Up] or [Down] to select “Voice/Call Alert” or
“Message/Status” to be deleted, then
push [OK].
• Voice/Call Alert: The received Individual calls
and Call Alert calls are saved
in the log.
• Message/Status: The received Status messages
and Messages are saved in the
log.
5. Push [Left] or [Right] to select “OK,” then
push
[OK].
• The selected call log is deleted from the Incoming list.
6.
Hold down [Back] for 1 second to return to the
standby screen.
To Next Page
Loading...
