2
PANEL DESCRIPTION
2-20
Category: Audio Setting
TX Noise Cancel
Push to select the TX Noise Cancel level between 1
and 3 to suppress the microphone input noise to make
the audio easy to hear.
L When “OFF” is selected, the microphone input noise is
not suppressed.
RX Noise Cancel
Push to select the RX Noise Cancel level between 1
and 3 to suppress the receive audio noise to make the
audio easy to hear.
L When “OFF” is selected, the receive audio noise is not
suppressed.
Category: Bluetooth
Bluetooth
Push to turn the Bluetooth
®
function ON or OFF.
Waiting Pairing
Push to enter the Pairing Request Wait mode.
• The transceiver waits for a pairing request from a
Bluetooth
®
device.
Category: Vibration
Vibration (For the Portable type transceivers)
Push to turn the Vibration function ON or OFF.
L When “ON” is selected, the transceiver vibrates when a
matching call or ID is received.
Category: Display
Backlight
Push to select the Backlight level.
(For the Portable type transceivers)
• OFF: The backlight is continuously OFF.
• ON: Turns the backlight is continuously ON.
• Auto: When any switch except [PTT] is pushed, the
backlight lights for 5 seconds.
(For the Mobile type transceivers)
• OFF: The backlight is continuously OFF.
• ON: Turns the backlight is continuously ON.
• Auto: Turns the backlight continuously ON with the
Brightness setting level.
When the Dimmer terminal of the D-Sub 25
pin or Option Connector 22 pin is activated,
the backlight lights dimly.
Brightness
Push to open the “Brightness” window. Then, push
[Up] or [Down] to select the desired level between 0
(the lowest) and 7 (the highest).
Dimmer
Push to open the “Dimmer” window. Then, push [Up]
or [Down] to select the desired level between 0 (the
lowest) and 7 (the highest).
NOTE: It is recommended to be the Dimmer level
lower than the Brightness level.
LCD Mode
Push to select the LCD Mode.
• Day : The LCD is set to the Day mode.
The Day mode is for the daytime operation,
and the display backlight color is set to
white.
• Night : The LCD is set to the Night mode.
The Night mode is for the nighttime
operation, and the display backlight color is
set to black.
Assignable Software key functions
D For keys and keypads (Continued)
To Next Page
Loading...
