6
MENU SCREEN
6-7
Menu items (Continued)
Utility System Beep Lv (System Beep level)
Sets the System Beep output level.
p. 6-17
Emer Beep Lv (Emergency beep Level)
Sets the Beep output level when in the Emergency mode.
p. 6-17
Key-touch Beep Lv (Key-touch beep Level)
Sets the Key-touch Beep output level.
p. 6-17
Side Tone Lv (Side Tone beep Level)
Set the Side Tone Beep output level.
p. 6-17
Opening Beep Lv (Opening beep Level)
Sets the Opening Beep output level.
p. 6-17
Ringer Lv (Ringer beep Level)
Sets the Ringer output level.
p. 6-17
SQL Level (Squelch Level)
Sets the squelch level.
p. 6-17
Warning Beep Lv (Warning beep Level)
Sets the Warning Beep output level.
p. 6-17
Announce Lv (Announce beep Level)
Sets the Beep output level for the Channel Announce function.
p. 6-17
Information Battery Info (Battery Information)
Displays the battery voltage.
p. 6-18
Comment
Displays the transceiver’s comments.
p. 6-18
Firmware Info (Firmware Information)
Displays the transceiver’s rmware information.
p. 6-18
Own ID
Displays the transceiver’s unit ID.
p. 6-18
RSSI/BER/MER
Displays the transceiver’s RSSI (Received Signal Strength Indication) level, BER (Bit
Error Rate), and MER (Message Error Rate).
p. 6-18
To Next Page
Loading...
