69
15
OTHER FUNCTIONS
■ Display brightness
The brightness of the LCD can be adjusted from 0% to 100%
in 3 or 4% steps. Adjust brightness to suit lighting conditions
and personal preferences.
q Push [DISP] to enter display set mode.
•Push [CHG/L] if [DISP] is not displayed.
w Push [Y] or [Z] to select the ‘Bright’ item.
•Left-hand tuning dial can also select the item.
e Rotate the right-hand tuning dial to select the desired
brightness.
r Push [ï] to exit display set mode.
■ Indication type
The indication type can be selected from 4 types.
q Push [DISP] to enter display set mode.
•Push [CHG/L] if [DISP] is not displayed.
w Push [Y] or [Z] to select the ‘Display Type’ item.
•Left-hand tuning dial can also select the item.
e Rotate the right-hand tuning dial to select the desired indi-
cation type.
r Push [ï] to exit display set mode.
■ My call function
The opening title when turning power ON can be changed to
your call sign, etc. Up to 8 characters can be programmed.
q Push [DISP] to enter display set mode.
•Push [CHG/L] if [DISP] is not displayed.
w Push [Z] to select the ‘My Call’ item.
•Left-hand tuning dial can also select the item.
e Push [EDIT] to enter programming mode.
•The first character of the name flashes.
r Rotate the right-hand tuning dial to select the desired char-
acter.
•A to Z, 0 to 9, – (hyphen) and space are available.
t Push [≈] to advance to the next character.
•Push [Ω] to select the previous character.
y Repeat r and t until the desired name is input.
u Push [ï] to program the name and exit programming
mode.
i Push [ï] again to exit display set mode.
To Next Page
Loading...
