Icom IC-80AD - Page 146

D GPS-TX mode items (GPS-TX)
Sets the transmission of data from a connected GPS receiver
ON and OFF.
When the position information is received from a connected
GPS receiver and GPS.ATX (GPS Auto TX Timer) setting
(p. 142) is set to a specific time, the transceiver automatically
transmits the current position and message at the set inter-
val.
• OFF : Transmitting position data is disabled.
(default)
• DVG : Transmitting position data in GPS mode.
• DVA : Transmitting position data in GPS-A mode.
 Sentence formatter setting
q Select “DVG” in GPS-TX mode item, then push [ ](5) to
enter the sentence formatter selection.
w Push [](2) or [](8) to select the desired sentence
formatter.
• RMC, GGA, GLL, GSA, VTG and GSV are selectable.
GGA sentenceRMC sentence
e Push [ ](5) to enter the desired sentence formatter
selection.
r Push [](2) or [](8) to select the setting.
• See right above for setting details.
RMC sentence: ONRMC sentence: OFF
t Push [ ](5) to set ON/OFF.
y Push [](2) or [ ](8) to select next sentence and
repeat steps w to t, or push [MENU
] to return to
frequency indication.
• No more than four sentence formatters can be activate
simultaneously. (Continue to the next page.)
138
12
MENU SCREEN OPERATION