91
9
MEMORY/CALL CHANNELS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
N General description
The IC-80AD has 1050 memory channels, and 2 call chan-
nels. Memory channels include 50 scan edge memory chan-
nels
(25 pairs) for storage of often-used frequencies.
Also, 26 memory banks, A to Z, are available in each band for
storing groups of frequencies, etc. Up to 100 channels can be
assigned to a bank.
D Memory channel contents
The following information can be programmed into memory
channels:
• Operating frequency
(p. 23)
• Operating mode (p. 25)
• Duplex direction (+DUP or –DUP) with an offset frequency
(p. 31)
• Subaudible tone encoder (p. 29), tone squelch or DTCS
squelch ON/OFF
(p. 150)
• Subaudible tone frequency (p. 119), tone squelch fre-
quency or DTCS code with polarity (pgs. 119, 120)
• Scan skip information (p. 108)
• Memory bank (p. 95)
• Memory name (p. 97)
• Tuning step (p. 22)
• Call sign squelch or Digital code squelch* (p. 148)
• Station call sign* (pgs. 37, 47)
• RPT1/RPT2 call sign* (pgs. 38, 47)
*Available for DV mode operation only.
NOTE:
Memory data can be erased by static electricity, electric
transients, etc.
In addition, they can be erased by malfunction and during
repairs.
Therefore, we recommend that memory data be written
down or be saved to a PC using the CS-80/880
CLONING
SOFTWARE (free download software).
To Next Page
Loading...
Need help?
General
