1
1
ACCESSORY ATTACHMENT
1
N Antenna
Insert the supplied antenna into the antenna connector and
screw down the antenna as shown below.
NEVER carry the transceiver by holding the antenna.
KEEP
the jack cover attached when jack is not in use to pro-
tect the connector from dust and moisture.
For your information
Third-party antennas may increase transceiver
performance. An optional AD-92SMA
ANTENNA
CONNECTOR ADAPTER is available to connect an
antenna that has a BNC connector.
N Belt clip
CAUTION:
USE the supplied screws only. Using screws longer than
specified could damage the transceiver.
To Next Page
Loading...
Need help?
General
