105
12
OTHER FUNCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■ Transmitting a DTMF code
D Transmitting from DTMF memory
The selected DTMF code is transmitted at each push of the
[SQL] switch while transmitting.
The transmitting speed at which DTMF memories send in-
dividual DTMF characters can be set in “DTMF SPEED”
menu. (p. ??)
q Set the desired frequency. (p. ??)
w Push and hold [./EMR/DTMF.M](#) for 1 sec. to enter
DTMF memory.
e Rotate [DIAL]
†
to select the desired DTMF memory chan-
nel.
r Push [VFO/MHz] to exit DTMF memory.
t While pushing [PTT], push [SQL] to transmit the selected
DTMF code.
D Transmitting a DTMF code directly
DTMF code can be transmitted via keypad directly while
transmitting.
q Set the desired frequency. (p. ??)
w While pushing [PTT], push the desired keys to transmit the
DTMF code.
• [0/CQ]–[9/BK/T.SCAN] input “0”–“9,” [VFO/MHz](A) inputs “A,”
[MR/S.MW](B) inputs “B,” [CALL/RX➝CS](C) inputs “C,”
[BAND](D) inputs “D,” [./EMR/DTMF.M](#) inputs “#” and
[REC/MODE](✱) inputs “✱.”
To Next Page
Loading...
