Icom IC-91AD - I Copying Memory;Call Contents

71
8
MEMORY/CALL CHANNELS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■ Copying memory/call contents
This function transfers a memory channel’s contents to VFO
(or another memory/call channel). This is useful when search-
ing for signals around a memory channel frequency and for
recalling the offset frequency, subaudible tone frequency etc.
D Memory/call➪VFO
qSelect the memory (call) channel to be copied.
➥ Push [MR/S.MW] or [CALL/RX➝CS] to select memory
mode or call channel mode, then rotate [DIAL] to select
the desired channel.
wPush and hold [MR/S.MW] for 1 sec. to enter select mem-
ory write mode.
• 1 short and 1 long beep sound.
•“
µµ
” indicator blinks.
eRotate [DIAL] to select “VFO.”
rPush and hold [MR/S.MW] for 1 sec. to write the selected
channel contents to VFO mode.
• Returns to VFO mode automatically.
Pushing [MR/S.MW] for 2 sec. at the step w, will also
copy the memory contents to VFO. In this case, the steps
e and r are not necessary.
D Memory/call➪memory/call
qSelect the memory (call) channel to be copied.
➥ Push [MR/S.MW] or [CALL/RX➝CS] to select memory
mode or call channel mode, then rotate [DIAL] to select
the desired memory channel.
wPush and hold [MR/S.MW] for 1 sec. to enter select mem-
ory write mode.
• 1 short and 1 long beep sound.
•“
µµ
” indicator blinks.
• Do not hold [MR/S.MW] for more than 2 sec. otherwise the
memory contents will be copied to VFO.
eRotate [DIAL] to select the target memory (call) channel.
rPush and hold [MR/S.MW] for 1 sec. again to copy.
A
FMFM
145 870
PSKIPPSKIP
A
µ
FMFM
145 870
011
145 000
FMFM
µ
VFO
145 870
BANKBANK :----:----
MNAME:MNAME:
SKIPSKIP :OFF:OFF
FMFM
r
µ
011
During memory mode,
rotate [DIAL] to select
memory channel 11 .
Rotate [DIAL] to select
VFO .
Push
for 1 sec.
Push
for 1 sec.
VFO is selected.
[EXAMPLE]: Copying memory channel 11 to VFO.