109
12
OTHER FUNCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
D
Setting digital code
for digital code squelch
or beep
q Push [MAIN/DUAL] to select B band, then push and hold
[REC/MODE] for 1 sec. several times to select DV mode.
w Enter “DIGITAL CODE” in DV SET MODE.(p. ??)
e Rotate [DIAL]
†
to select the desired digital code.
• Each operating band and each memory channel have indepen-
dent settings.
r Push [5/SKIP](ï) to set digital code and push
[MENU/LOCK] to return to frequency indication.
D Setting the your and my call signs for call
sign squelch or beep
q Push [MAIN/DUAL] to select B band, then and hold
[REC/MODE] for 1 sec. several times to select DV mode.
w Enter “YOUR CALL SIGN” in CALL SIGN set mode. (p. ??)
e Rotate [DIAL]
†
to select the desired call sign.
• Input the call sign if the desired call sign is not registered in the
transceiver. See p. ?? for detail.
r Push [5/SKIP](ï) to set call sign and return to “CALL
SIGN” in menu screen.
Continue to the next page.
MENU screen ➪ DV SET MODE ➪ DIGITAL CODE
(Push [MENU/LOCK]) (Rotate [DIAL]
†
, then push [5/SKIP](ï)
†
.)
■ Digital code and call sign setting
The optional UT-121 is required for IC-91A
†
[DIAL] ↔ [2/SCAN](
∫∫
)/[8/TS](
√√
) [5/SKIP](ï) ↔ [6/M.N](
≈≈
)
To Next Page
Loading...
