Icom IC-91AD - Page 114

108
12 OTHER FUNCTIONS
■ TONE FREQUENCY AND DTCS CODE (Continued)
D Setting subaudible tones for repeater or tone
squelch
q Enter “CTCSS TONE” in DUP/TONE… (or RPT TONE) set
mode. (p. ??)
w Rotate [DIAL]
†
to select the desired repeater or CTCSS
tone frequency.
• Each operating band and each memory channel have indepen-
dent settings.
e Push [5/SKIP](ï) to set repeater or CTCSS tone fre-
quency and push [MENU/LOCK] to return to frequency in-
dication.
D Setting DTCS code for DTCS squelch or
beep
q Enter “DTCS TONE” in DUP/TONE... set mode. (p. ??)
w Rotate [DIAL]
†
to select the desired DTCS tone code.
• Each operating band and each memory channel have indepen-
dent settings.
e Push [5/SKIP](ï) to set DTCS tone code and push
[MENU/LOCK] to return to frequency indication.
DTCS phase mode can be selected in “DTCS POLARITY”
menu. (p. ??)
DV SET MODE
SCAN
r
DUP/TONE...
***** MENU *****
88.5
200
500
r
300
CTCSS TONE
88.5
200
500
r
300
REPEATER TONE
DV SET MODE
SCAN
r
DUP/TONE...
***** MENU *****
023023
200200
500500
r
300300
DTCS TONE
MENU screen ➪ DUP/TONE... ➪ DTCS TONE
(Push [MENU/LOCK]) (Rotate [DIAL]
†
, then push [5/SKIP](ï)
†
.)
DV SET MODE
SCAN
r
DUP/TONE...
***** MENU *****
88.588.5
200200
500500
r
300300
CTCSS TONECTCSS TONE
88.588.5
200200
500500
r
300300
REPEATER TONE
DV SET MODE
SCAN
r
DUP/TONE...
***** MENU *****
023
200
500
r
300
DTCS TONE
MENU screen ➪ DUP/TONE... ➪ CTCSS TONE
(Push [MENU/LOCK]) (Rotate [DIAL]
†
, then push [5/SKIP](ï)
†
.)