Icom IC-91AD - I Duplex Operation

31
6
REPEATER AND DUPLEX OPERATIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■ Duplex operation
D Setting offset frequency
q Enter “OFFSET FREQ” in DUP/TONE… set mode. (p. 97)
w Rotate [DIAL]
†
to set offset frequency.
e Push [5/SKIP](ï)
(or [4/DUP](
ΩΩ
)) to return to DUP/TONE…
set mode, and push [MENU/LOCK] to return to frequency
indication.
D Setting duplex direction
➥ Push and hold [4/DUP] for 1 sec. to select “–DUP” or
“+DUP”.
•“–DUP” or “+DUP” indicates the transmit frequency for minus
shift or plus shift, respectively.
• When offset frequency is 0.6 MHz.
U.S.A. and Korean versions:
Auto repeater function has priority over the manual duplex
setting. If the frequency changes after setting, the auto re-
peater function may have changed the duplex setting.
–Duplex example +Duplex example
Receiving
Transmitting
A
TONETONE
FMFM
145300
P SKIPSKIP
-DUP-DUP
A
TONETONE
FMFM
144700
P SKIPSKIP
-DUP-DUP
Receiving
Transmitting
A
TONETONE
FMFM
145300
P SKIPSKIP
+DUP+DUP
A
TONETONE
FMFM
145900
P SKIPSKIP
+DUP+DUP
5.0 MHz offset
No offset frequency
5.000.00 5.000.00
OFFSET FREQ
0.000.00 0.000.00
OFFSET FREQ
MENU screen ➪ DUP/TONE… ➪ OFFSET FREQ
(Push [MENU/LOCK]) (Rotate [DIAL]
†
, then push [5/SKIP] (ï)
†
.)
Although [DIAL] and [5/SKIP](ï) are used for description
in this section, [2/SCAN](
∫∫
)/[8/TS](
√√
) and [6/M.N](
≈≈
) are
available instead of [DIAL] and [5/SKIP](ï).
†
[DIAL] ↔ [2/SCAN](
∫∫
)/[8/TS](
√√
) [5/SKIP](ï) ↔ [6/M.N](
≈≈
)