110
12 OTHER FUNCTIONS
D Setting the your and my call signs for call sign squelch or
beep (Continued)
t Rotate [DIAL]
†
to select “MY CALL SIGN” in CALL SIGN
set mode, then push [5/SKIP](ï)
†
to enter “MY CALL
SIGN” setting.
y Rotate [DIAL]
†
to select the desired call sign.
• Input the call sign if the desired call sign is not registered in the
transceiver. See p. ?? for detail.
u Push [5/SKIP](ï)
†
to set call sign and push
[MENU/LOCK] to return to frequency indication.
CAUTION!: Use digital code squelch function when operat-
ing with more than 3 stations. Because the digital call sign
squelch function recognizes “MY CALL SIGN”. Therefore,
the digital call sign squelch function can be used when op-
erating with only one station.
NOTE:
• The tone/DTCS code squelch opens sometimes when
other stations communicate with adjacent tone frequency
or DTCS code.
• Sounds no audio with S-meter swing when receiving a sig-
nal which is not included in “MY CALL SIGN” on DV
mode.
To Next Page
Loading...
