19
4
FREQUENCY AND CHANNEL SETTING
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
DD
Using the keypad
The frequency can be directly set via numeral
keys.
• When editing a frequency outside of the fre-
quency range, the previously displayed frequency
is automatically recalled after editing last digit.
qPush [VFO/MHz] to select VFO mode, if
necessary.
w Enter the desired frequency via the keypad.
Depending on the tuning step setting, 1
kHz digit may not acceptable to input. In
this case, enter “0” as 1 kHz digit, then ro-
tate [DIAL] to set the desired frequency.
To Next Page
Loading...
