26
5 BASIC OPERATION
DD
Main band selection
➥ Push [MAIN/DUAL] to select A band (upper side) or B
band (lower side) as main band (operating band) alter-
nately.
DD
Setting audio volume
The audio level for dualwatch operation can be adjusted both
of A band and B band synchronously (default).
This setting can be set to separately for each band in sounds
set mode.
qPush and hold [MAIN/DUAL] for 1 sec. to enter the dual-
watch operation, if necessary.
wRotate
[VOL] to adjust the audio level for the main band.
• If squelch is closed, push and hold [SQL] to verify the audio
level.
• The display shows the volume level while setting.
To Next Page
Loading...
