Icom IC-91AD - Page 45

39
7
DV MODE OPERATION (Optional UT-121 is required for IC-91A)
7
DD
When calling the desired station
Continued instruction from step x on page 38.
cRotate [DIAL]
†
to select “UR,” then push [5/SKIP](ï)
†
.
• YOUR CALL SIGN screen is displayed.
vRotate [DIAL]
†
to select the call sign channel that desired
station’s call sign is programmed.
• See page 36 for station call sign programming details.
bPush [5/SKIP](ï) to set the station’s call sign and return to
CALL SIGN screen.
nPush [MENU/LOCK] to return to frequency indication.
mOperate the instruction steps t and y on page 38.
DD
When sending a CQ
Continued instruction from step x on page 38.
cRotate [DIAL]
†
to select “UR,” then push [5/SKIP](ï)
†
.
• YOUR CALL SIGN screen is displayed.
vRotate [DIAL]
†
to select the call sign channel that “CQC-
QCQ” is programmed.
Or, select “U” then push [6/M.N](
≈≈
) and [0/CQ] in se-
quence to set “CQCQCQ.”
bPush [5/SKIP](ï) to set “CQCQCQ” as the call sign and
return to CALL SIGN screen.
nPush [MENU/LOCK] to return to frequency indication.
mOperate the instruction step t and y on page 38.
UR:CQCQCQUR:CQCQCQ
R1:R1:
R2:NOT USE*R2:NOT USE*
MY:MYCALLMY:MYCALL
/IC91 /IC91
CALL SIGN
r
UR:STATION1UR:STATION1
R1:R1:
R2:NOT USE*R2:NOT USE*
MY:MYCALLMY:MYCALL
/IC91 /IC91
CALL SIGN
r
†
[DIAL] ↔ [2/SCAN](
∫∫
)/[8/TS](
√√
) [5/SKIP](ï) ↔ [6/M.N](
≈≈
)
1
2
3
4
5
6
8
9
10
11
12
13
14
15
16
17
18
19