50
7 DV MODE OPERATION (Optional UT-121 is required for IC-91A)
DD
Copying the call record contents into call sign memory
This is a way to copying the call record contents (“CALLER,”
“RXRPT1” and “RXRPT2”) into call sign memory (“UR,” “R1” and
“R2”) at the same time or individually.
qPerform the steps q to r of “D Desired call record indica-
tion” (p. 00) to select the desired call record or call sign.
wPush [6/M.N](
≈≈
) to select copy select mode.
• COPY SELECT screen is displayed.
eRotate [DIAL]
†
to select the desired call sign to be copied
from “ALL,” “RXRPT1” and “RXRPT2.”
•“ALL” selection won’t be appeared when either station or re-
peater call sign memory has no blank channel.
• When “ALL” is selected
➥ Push [6/M.N](
≈≈
) to copy the selected record’s contents
into the appropriate call sign memory.
• Returns to RX CALL SIGN screen automatically.
• When “CALLER,” “RXRPT1” or “RXRPT2” is
selected
z
Push
[6/M.N](
≈≈
) then r
otate [DIAL]
†
to select the desired
condition of call sign memory channel selection to be
copied to from “AUTO” and “LIST SEL.”
•“AUTO” selection won’t be appeared when the appropriate call
sign memory has no blank channel.
• Go to step r when “AUTO” is selected.
xPush [6/M.N](
≈≈
), then select the desired call sign mem-
ory channel to copy to with [DIAL].
cPush [6/M.N](
≈≈
) to copy the call sign into the selected
call sign memory.
• Returns to RX CALL SIGN screen automatically.
rPush [MENU/LOCK] to return to frequency indication.
To Next Page
Loading...
