Icom IC-91AD - Page 61

55
7
DV MODE OPERATION (Optional UT-121 is required for IC-91A)
7
DD
Voice memory recording for automatic reply
qEnter “RELY VOICE” in DV voice memo set mode.
• REPLY VOICE screen is displayed.
wWhile pushing and holding [PTT], speak into the micro-
phone.
• Up to 10 second message is recordable.
• The recording stops after 10 second or when [PTT] is released.
ePush [4/DUP](Ω) to return to DV VOICE MEMO screen.
rPush [MENU/LOCK] to return to frequency indication.
DD
Play-back or erase the voice memory
qPush [MENU/LOCK] to select menu mode indication.
wRotate [DIAL]
†
to select “DV VOICE MEMO,” then push
[5/SKIP](ï)
†
.
eRotate [DIAL]
†
to select “REPLY VOICE,” then push
[5/SKIP](ï)
†
.
• REPLY VOICE screen is displayed.
rTo play-back the recorded voice memory, push
[5/SKIP](ï).
• Push [5/SKIP](ï) again to pause, push [6/M.N](
≈≈
) to cancel the
play-back.
tTo erase the recorded voice memory, push and hold
[1/SCOPE](CLR) for 1 sec.
REPLY VREPLY V
PTT:PTT: ●
:BACK:BACK CLR:CLRCLR:CLR
REPLY VOICEREPLY VOICE
:
r
MENU screen ➪
DV VOICE MEMO
➪
REPLY VOICE
(Push [MENU/LOCK]) (Rotate [DIAL]
†
, then push [5/SKIP](ï)
†
.)
IMPORTANT!
Deactivate the dualwatch function and set minimum [VOL]
level when recording the DV voice memo.
Otherwise the received audio or unwanted noise from A
band is also recorded into the voice memory.
†
[DIAL] ↔ [2/SCAN](
∫∫
)/[8/TS](
√√
) [5/SKIP](ï) ↔ [6/M.N](
≈≈
)
1
2
3
4
5
6
8
9
10
11
12
13
14
15
16
17
18
19