63
7
DV MODE OPERATION (Optional UT-121 is required for IC-91A)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
◆ Playing-back and erasing the recorded audio
qEnter “TRACK” in DV voice memo set mode.
• TRACK screen is displayed
wRotate [DIAL]
†
to select the desired audio track to be play-
back or erased.
•“✱” is displayed beside the track number when the selected track
has been recorded.
ePush [5/SKIP](ï) to play-back the recorded audio.
• Push [5/SKIP](ï) again to pause, push [6/M.N](
≈≈
) to stop play-
back.
rPush and hold [1/SCOPE](CLR) for 1 sec. to erase the
recorded audio.
tPush [4/DUP](
ΩΩ
) to return to DV VOICE MEMO screen.
yPush [MENU/LOCK] to return to frequency indication.
DD
DV automatic detect
The “DV” mode indicator blinks when other than DV mode
signal is received during DV mode operation.
The IC-91A/91AD has DV automatic detection that selects
and monitors in FM mode when other than DV mode signal is
received.
qEnter “AUTO DETECT” in DV set mode.
wRotate [DIAL]
†
to turn the DV automatic detect function ON
and OFF.
OFF : “DV” mode indicator blinks, however the trans-
ceiver receives in DV mode even other than DV
mode signal is received.
ON : “DV” mode indicator blinks and the transceiver
monitors the signal in FM mode.
ePush [5/SKIP](ï) to return to DV SET MODE screen
rPush [MENU/LOCK] to return to frequency indication.
NOTE: The received FM audio may be distorted when re-
ceiving an FM signal with DV automatic detect function.
MENU screen ➪ DV SET MODE ➪ AUTO DETECT
(Push [MENU/LOCK]) (Rotate [DIAL]
†
, then push [5/SKIP](ï)
†
.)
To Next Page
Loading...
