93
11
MENU SCREEN OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
DD
Digital repeater setting
When accessing the repeater’s call sign is different as your
programmed, the repeater call sign can be stored into “RPT1”
and/or “RPT2” automatically by reading the repeater’s trans-
mission. The stored repeater’s call sign can be re-called when
selecting the repeater call sign. (default: ON)
DD
RX call sign auto write
When an individual station call is received, the calling station
call sign can be set for operation automatically.
(default: OFF)
DD
Repeater call sign auto write
When accessing the repeater’s call sign is different as your
programmed, the repeater call sign can be stored into “RPT1”
and/or “RPT2” automatically by reading the repeater’s trans-
mission. The stored repeater’s call sign can be re-called when
selecting the repeater call sign. (default: OFF)
The transceiver stores the received repeater call sign into
repeater call sign memory only when the repeater’s call
sign has not been programmed in the memory.
To Next Page
Loading...
