EasyManua.ls Logo

Icom IC-A110 - 7 Specifications

Icom IC-A110
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
7
SPECIFICATIONS
D General
•Frequencycoverage :118to136.975MHz
•Channelspacing :25/8.33kHz
•Mode :AM(6K00A3E/5K6A3E)
•
Number of memory channels
: 99
•Acceptablepowersupply :13.75
V or 27.5
V DC
(negative ground)
Automatic selection
•Usabletemp.range :–30˚Cto+60˚C
•Frequencystability :±5ppm
•Currentdrain
(at 13.75 V DC)
:
Tx 5 A (max.)
Rx 4 A ( at AF max.)
0.5 A (at STANDBY)
•Dimensions :150
(W) 50 (H) 180 (D) mm
(projections not incl.)
5.9(W) 2(H) 7.1(D) in
•Weight(approximately) : 1.5 kg; 3 lb 5 oz
D Transmitter
•Outputpower :36W(pep) typical
9 W (carrier) typical
•Modulation :LastStagemodulation
•Modulationlimiting :70%to100%
•Audioharmonicdistortion :Lessthan10%
(at85%modulation)
•Humandnoiseratio :Morethan40dB
•Spuriousemissions :–16dBmorless
•Antennaimpedance :Standard50 with SWR <3
D Receiver
•Receivesystem :Doubleconversion
superheterodyne
•Intermediatefrequencies :1st 38.85MHz
2nd 450 kHz
•Sensitivity
(at 6 dB S/N) : Less than 1 µV (pd)
•Squelchsensitivity :Lessthan0.35µV(pd)
(at threshold)
•Selectivity
25kHzch.spacing :Morethan±8kHz(at–6dB)
Lessthan±17kHz(at–40dB)
Lessthan±25kHz(at–60dB)
8.33kHzch.spacing Morethan±2.778kHz(at–6dB)
Lessthan±7.37kHz(at–60dB)
•Spuriousresponserejc, :Morethan74dBµ
•Audiooutputpower :Morethan10W(at13.75V
DC with 8 load60%MOD.
10%distortion)
Sidetone
More than 100 mW (with 500
load60%MOD.10%distortion)
•Humandnoise :Morethan25dB
•Audiooutputimpedance :Ext.SP8
Sidetone 500
All stated specifications are subject to change without notice
or obligation.

Other manuals for Icom IC-A110

Related product manuals