EasyManuals Logo

Icom IC-A110 Instruction Manual

Icom IC-A110
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
PRECAUTIONS
i
R WARNING! NEVER operate the transceiver with a
headset or other audio accessories at high volume levels.
Hearing experts advise against continuous high volume op-
eration. If you experience a ringing in your ears, reduce the
volume level or discontinue use.
R WARNING! NEVER connect the transceiver to an
AC outlet or to a power source of more than 27.5 V DC, or
use reverse polarity. This could cause a fire or damage the
transceiver.
CAUTION: NEVER connect the transceiver to a power
source that is DC fused at more than 5 A. Accidental reverse
connection will be protected by this fuse, higher fuse values
will not give any protection against such accidents and the
transceiver will be ruined.
DO NOT operate the transceiver near unshielded electrical
blasting caps or in an explosive atmosphere.
Always place unit in a secure place to avoid inadvertent use
by children.
DO NOT push the PTT switch when you don’t actually de-
sire to transmit.
FOREWORD
READ ALL INSTRUCTIONS carefully and completely
before using the transceiver.
SAVE THIS INSTRUCTION MANUAL This in-
struction manual contains important operating instructions for
the IC-A110.
EXPLICIT DEFINITIONS
The explicit definitions below apply to this instruction man-
ual.
WORD DEFINITION
RWARNING!
Personal injury, fire hazard or electric shock
may occur.
CAUTION Equipment damage may occur.
NOTE
If disregarded, inconvenience only. No risk
of personal injury, fire or electric shock.
For Canada:
This device complies with RSS-310 of Industry Canada. Operation is subject to
the condition that this device does not cause harmful interference.
Cet appareil est conforme au CNR-310 d’Industrie Canada. Son exploitation
est autorisée sous réserve que l’appareil ne cause pas de brouillage préjudi-
ciable.

Other manuals for Icom IC-A110

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Icom IC-A110 and is the answer not in the manual?

Icom IC-A110 Specifications

General IconGeneral
Frequency Range118.000–136.975 MHz
Channel Spacing25 kHz / 8.33 kHz
Power Supply Requirement13.75 V DC ±15%
Output Power36W (PEP), 9W (carrier)
Dimensions150 × 50 × 180 mm (W × H × D)
ModulationAM
Operating Temperature Range-20°C to +55°C –4°F to +131°F

Related product manuals