Icom IC-M412 - BASIC OPERATION - CHANNEL MANAGEMENT

5
3
BASIC OPERATION
2
3
n Channel selection
ï Channel 16
Channel 16 is the distress and safety channel. It is used for
establishing initial contact with a station and for emergency
communications. Channel 16 is monitored during both Dual-
watch and Tri-watch. While in the stand-by mode, you must
monitor Channel 16.
➥ Push [16] to select Channel 16.
➥ Push [CH/WX] to return to the previous display, or push
[Y] or [Z] to select a different channel.
Push
Convenient!
When the Favorite channel function is turned ON (p. 47), push
the [Y]/[Z] keys on the microphone to sequentially select the
favorite channels in the selected channel group.
•TheFavoritechannelsaresetbytheTAGchannelsetting.(p.11)
ï Channel 9 (Call channel)
Each regular channel group has a separate leisure-use Call
channel. The Call channel is monitored during Tri-watch. The
Call channels can be programmed (p. 8) and are used to
store your most often used channel in each channel group
for quick recall.
➥ Hold down [9](16) for 1 second to select the Call channel
of the selected channel group.
 •“CALL” and the Call channel number appear.
 •Eachchannelgroupmayhavean independentCall channel
after programming a Call channel. (p. 8)
➥ Push [CH/WX] to return to the previous display, or push
[Y] or [Z] to select a different channel.
Hold down
for 1 sec.