25
6
DSC OPERATION
New2001
6
y After the Individual acknowledgement call has been trans-
mitted, the specified channel (specified by the calling sta-
tion) is automatically selected when “ABLE” is selected. Or
the display returns to the previous screen (before entering
the DSC menu) when “UNABLE” is selected in step e.
Scrolls
After transmitting ‘ABLE’ ACK
D Transmitting a Group call
The Group call function allows you to transmit a DSC signal
to a specific group only.
q Push [MENU] to enter the DSC menu.
w Push [Y] or [Z] to select “GROUP,” then push [ENT].
e Push [Y] or [Z] to select a desired pre-programmed
Group address or “MANUAL INPUT,” then push [ENT].
•TheIDcodeforthegroupcanbesetinadvance.(p.15)
•When“MANUALINPUT”isselected,setthe8-digitMMSIID
code for the group you wish to call with [Y] or [Z]. (See About
Manual Inputting on the next page.)
☞ Continued on the next page
To Next Page
Loading...
