Icom IC-M412 - DSC OPERATION - ADDRESS AND GROUP MANAGEMENT

15
6
DSC OPERATION
New2001
6
D Deleting Address ID
q Push [MENU] to enter the DSC menu.
w Push [Y] or [Z] to select “ADDRESS,” then push [ENT].
e Push [Y] or [Z] to select “DEL INDV ID,” then push [ENT].
 •WhennoaddressIDisprogrammed,“NOID”isdisplayed.
Scrolls
r Push [Y] or [Z] to select a desired ID name for deleting
and then push [ENT].
 •“READY”appears.
t Push [ENT] to delete the selected address ID and return
to normal operation.
D Programming Group ID
q Push [MENU] to enter the DSC menu.
w Push [Y] or [Z] to select “ADDRESS,” then push [ENT].
e Push [Y] or [Z] to select “ADD GROUP ID,” then push [ENT].
Scrolls
r Push [Y] or [Z] to set the 9-digit Group ID, then push [ENT].
 •Push[CH/WX] or [16] to move the cursor forward or backward.
 •Push[CLR] to cancel and exit the programming, if desired.
The first one digit is specified ‘0’ for a Group ID.
The first two digits are ‘0’ for any Coast station ID.
☞ Continued on the next page