Icom IC-M412 - DSC OPERATION - REQUEST AND POLLING; Receiving Position and Polling Requests

38
6
DSC OPERATION
New2001
n Receiving DSC calls (Continued)
D Receiving a Position Request call
When a Position Request call is received:
➥ “ DSC” appears and “RCV POS REQUEST” scrolls in the
channel comment display.
➥ The beeps sound for 2 minutes.
 •Push[CLR] to stop the beeps.
➥Push [ENT] to reply to the call; push [CLR] to ignore the
call.
Scrolls
Appears
D Receiving a Polling Request call
When a Polling Request call is received:
➥ “ DSC” appears and “RCV POLL REQUEST” scrolls in the
channel comment display.
➥ The beeps sound for 2 minutes.
 •Push[CLR] to stop the beeps.
➥ Push [ENT] to reply to the call; push [CLR] to ignore the call.
Scrolls
Appears
D Receiving a Position Reply call
When a Position Replay call is received:
➥“DSC” and “POS REPLY” appear in the display.
 •The‘Latitude’and‘Longitude’fromthecalledstationarescrolled
in the channel comment display first Latitude co-ordinates and
then Longitude co-ordinates.
 •“NOPOSITION”scrollsinthechannelcommentdisplaywhen
no position information is received.
➥ The beeps sound for 2 minutes.
 •Push[CLR] to stop the beeps.
Scrolls
Appears
D Receiving a Polling Reply call
When a Polling Reply call is received:
➥ “ DSC” appears and “RCV POLL REPLY” scrolls in the
channel comment display.
➥ The beeps sound for 2 minutes.
 •Push[CLR] to stop the beeps.
Scrolls
Appears