22
6
DSC OPERATION
New2001
n Transmitting DSC calls
D Transmitting an Individual call (Continued)
e Push [Y] or [Z] to select a desired pre-programmed Indi-
vidual address or “MANUAL INPUT,” then push [ENT].
•TheIDcodefortheindividualcanbesetinadvance.(p.14)
•When“MANUALINPUT”isselected,setthe9-digitMMSIID
code for the individual you wish to call with [Y] or [Z]. (See
About Manual Inputting at the right column.)
About Manual Inputting:
Push [Y] or [Z] to input the 9-digit Individual ID, then
push [ENT].
•Push[CH/WX] or [16] to move the cursor forward or backward.
•Push[CLR] to cancel and exit the entry, if desired.
•Gotothenextstepafterpushing[ENT].
r Push [Y] or [Z] to select a desired intership channel, then
push [ENT].
•Intershipchannelsarealreadypresetintothetransceiverinpre-
ferred order.
•Afterpushing[ENT], Channel 70 is automatically selected and
“READY” appears in the channel comment display.
t Push [ENT] to transmit the Individual call.
•IfChannel70isbusy,thetransceiverstandsbyuntilthechannel
becomes clear.
•Routinecategoryonlyisavailable.
To Next Page
Loading...
