Icom IC-M424 - Page 40

31
7
DSC OPERATION
Transmitting an Individual Acknowledgement (continued) D
Select one of three options, then push [ENT]. e
 •AbletoComply :Makeanacknowledgmentcallwithout
any changes.
 •UnabletoComply :Youcannotmakeacommunication.
The Acknowledgement call (‘Unable to
Comply’) can be automatically trans-
mitted, if set. See page 66 for details.
 •ProposeNewChannel :You can make an acknowledgement
call, but you specify the intership chan-
nel. Select a desired intership channel,
using Dial, or [Y](CH)/[Z](CH), then
push [ENT].
The Individual ACK confirmation screen is displayed. r
Push [CALL] to transmit an acknowledgement call.
The screens shown below are displayed. t
Reply to the call using the microphone. y
Push [EXIT] to return to the normal operating mode. u