Icom IC-M424 - D Transmitting an All Ships Call

34
7
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Transmitting an All Ships call D
All ships, that have DSC transceiver, use Channel 70 as their
‘listening channel.’ When you want to announce a message to
these ships within range, use the ‘All Ships Call’ function.
Enter “ALL SHIPS CALL” in the DSC CALLS menu. q
MENU ➪ DSC Calls ➪ All Ships Call
(Push [MENU]) (Rotate Dial, then push [ENT].)
Select a desired category, using Dial or [ w Y]/[Z], then push
Dial or [ENT].
 •The selectable category may differ, depending on the pro-
grammed setting. Ask your dealer for the selectable categories.
Select a desired traffic channel, using Dial or [ e Y]/[Z], then
push Dial or [ENT].
 •Theselectedchannelisdisplayed.
A confirmation screen appears. r
 •Conrmthecallcontents.
Push [CALL] to transmit the All Ships call. t
 •IfChannel70isbusy,thetransceiverstandsbyuntilthechannel
becomes clear.
After the All Ships call has been transmitted, the following y
screen is displayed.
Announce the message using the microphone. u
After the announcement, push [EXIT] to return to the nor- i
mal operating mode.