Icom IC-M424 - Menu screen items; MMSI;GPS Information

67
7
DSC OPERATION
New2001
D Channel 16 Switch function
By regulation, after receiving a Distress call, the transceiv-
er switches the operating channel to Channel 16. However,
when this setting is set to “OFF,” the function enables the
transceiver to remain on the operating channel, even after
receiving a Distress call.
q Enter “CH 16 SWITCH”
in the DSC Settings menu .
MENU ➪ DSC Settings ➪ CH 16 Switch
(Push [MENU]) (Rotate Dial, then push [ENT].)
w Rotate Dial to set the Channel 16 Switch function to “Auto
(No Delay),” “10 Second Delay” or “OFF
,” then push [ENT].
 •Push[BACK]tocancelandreturntotheDSCSettingsmenu.
(default)
Auto (No Delay) : After receiving a Distress call, and
[ACPT] is pushed on the confirmation
screen, the transceiver immediately
switches to Channel 16.
10 Second Delay : After receiving a Distress call, and
[ACPT] is pushed on the confirma-
tion screen, the transceiver remains
on the current operating channel for
10 seconds. After that, the transceiver
automatically switches to Channel 16.
(default)
OFF : Even after receiving a Distress call,
the transceiver remains on the operat-
ing channel.
  •“
” appears.
Push [EXIT] to return to the normal operating mode. e