93
11
WLAN SETTING
D Power Link function
You can set whether the CT-M500 is automatically turned
ON or OFF when the transceiver is turned ON or OFF.
[MENU] > Settings > WLAN > Advanced Settings >
CT-M500 > Power Link
D NMEA over WLAN settings
You can output the NMEA 0183 (ver. 2.0 or later) sentence
through the Wireless LAN (WLAN).
[MENU] > Settings > WLAN > Advanced Settings >
NMEA over WLAN
Function
Select whether or not to output the NMEA 0183 sentence
to the devices in your WLAN.
Destination IP
Enter the destination IP address.
Destination Port
Enter the destination port number.
To Next Page
Loading...
