48
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
DIGITAL SELECTIVE CALLING (DSC)
7
■ Making an Individual call to an AIS target
D Selecting an AIS target on the IC-M510/IC-M510E
You can compose an Individual call to an AIS target selected on the Plotter screen or the
AIS list.
NOTE: The IC-M510/IC-M510E can be input AIS information from the built-in AIS
1. Select the AIS target from the Plotter screen, the
Target List, the Friends List, or the Danger list
(pp. 55, 57).
2. Push
.
• “Compose Non-Distress” screen is displayed.
3. Select “Channel,” then push [ENT] or [CH/ENT] to
display the Voice channel selection screen.
L See page 25 for details.
4. Select a channel to assign, and then push [ENT] or
[CH/ENT].
5. Push
to send the Individual call.
6.
comply”, an alarm sounds. Push
to turn OFF
the alarm.
• The channel assigned in step 4 is automatically
selected.
L If the called station cannot use the channel that you
station.
7. Push
.
8.
D Using an AIS transponder
is connected to the transceiver,
you can transmit an Individual call to a selected AIS target and the voice channel on the
transponder.
L See page 98 for connecting instructions.
NOTE: To ensure correct operation of the DSC function, make sure you correctly set the
CH70 SQL Level. (p. 47)
L
To Next Page
Loading...
