44
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
DIGITAL SELECTIVE CALLING (DSC)
7
■ Multiple-task mode
(For only the USA version, depending on the presetting)
If the Multiple-task function is enabled, the transceiver can hold up to 7 tasks. You can
the Multiple-task mode, select “Multiple” in the “Procedure” on the Menu screen. (p. 47)
[MENU] > Settings > DSC > Procedure
When the Multiple-task mode is activated,
is displayed on the operating screen.
NOTE: The Task mode has a Time-out Timer (TOT) function. After a certain period of
a task and returns to the operating screen.
displayed for 10 seconds.
D Holding a DSC task
Example: When a Group call is received:
1. Push
to turn OFF the alarm.
• The received call’s information is displayed.
2. Push
.
• The received Group call task is held into the task list
and returns to the operating screen.
D Activating the held DSC task
1. Push
to display the task list.
• The task list is displayed.
2.
3. Push
to activate the task.
• The activated task information is displayed.
4. Push [PTT] to communicate.
5. After finishing the communication, push
to
delete the task.
To Next Page
Loading...
