Icom IC-M510E

37
7
DIGITAL SELECTIVE CALLING (DSC)
D Receiving a Distress Relay call
When a Distress Relay call is received:
• An alarm sounds.
• 
• “
” blinks.
1. Push any
Alarm OFF
.
2. 
Ignore


The call is saved in the DSC Log.
“
” blinks continuously until you display
the call message.
Hold


Main screen.
Pause

Pause
is not displayed if the “CH Auto


channel is automatically selected.
Select
Resume

The call is saved in the DSC Log.
Accept

Accepts the call. Channel 16 is
automatically selected. Monitor Channel
16 as a coast station may require
assistance. After Channel 16 is selected,


STBY
 
screen.
History
 
screen.
3. Push
STBY
, and then
OK
to return to the operating
screen.