35
4
MENU SCREEN
New2001 New2001
BASIC MANUAL
CSV Format (QSO/RX Log)
Set CSV format options.
Separator/Decimal
Selects the separator and the decimal character for the CSV
format.
Date
Selects the date format.
Function
Sets various function’s options.
Squelch/ATT Select
Selects to use the S-Meter Squelch or the Attenuator function for
the [SQL] control.
Squelch Delay
Selects to shorten or lengthen the time until the squelch opens.
Fan Control
Selects the cooling fan control condition.
Dial Speed-UP
Turns the dial speed acceleration ON or OFF.
Auto Repeater*
Turns the Auto Repeater function ON or OFF.
Remote MIC Key
Selects the key function for [F-1] or [F-2] on the supplied remote-
control microphone.
During RX/Standby
Selects the key function to be used while receiving or in the
standby mode.
During TX
Selects the key function to be used while transmitting.
Up/Down MIC Key
Selects the key function for [UP] or [DN] on the optional hand
microphone.
During RX/Standby
Selects the key function to be used while receiving or in the
standby mode.
During TX
Selects the key function to be used while transmitting.
One-Touch PTT(Remote MIC)
Turns the One-Touch PTT function ON or OFF.
PTT Lock
Turns the PTT Lock function ON or OFF.
Busy Lockout
Turns the Busy Lockout function ON or OFF.
Time-Out Timer
Selects the Time-Out Timer time options.
Active Band
Enables continuous frequency selection across all bands by
rotating [DIAL].
MIC Gain
Sets the microphone sensitivity to suit your preference.
Data Speed
Selects the data transmission speed for low-speed
communication, or between the [DATA] jack and external modules
like a GPS receiver, and so on.
CI-V
Set CI-V options.
■ Menu items and their details (Continued)
*Does not appear, depending on the transceiver version.
To Next Page
Loading...
