EasyManua.ls Logo

Icom ID-4100A - Page 51

Icom ID-4100A
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
36
4
MENU SCREEN
New2001
4
BASIC MANUAL
CI-V Address (Function > CI-V)
Sets the transceiver’s unique CI-V hexadecimal address code.
CI-V Baud Rate
Sets the CI-V code transfer speed.
CI-V Transceive
Turns the CI-V Transceive function ON or OFF.
CI-V BluetoothREMOTE Transceive Address
Sets the address to inhibit the external control with CI-V for the
transceiver through the [SP2] (REMOTE) jack.
Power OFF (With No Controller)
Selects whether or not to automatically turn OFF the transceiver
when the controller is disconnected from the transceiver.
Display
Sets the Display options.
LCD Backlight Brightness
Selects the LCD backlight brightness level.
LCD Backlight Color
Selects the LCD backlight color.
Key Backlight Brightness
Selects the key backlight brightness level.
Key Backlight Color
Selects the key backlight color.
Backlight Night Time Setting
Night Time Setting
Selects whether or not to turn down the backlight brightness for
nighttime operation.
Brightness
Selects the backlight brightness level for nighttime operation.
Night Time Start
Sets the start time for nighttime operation.
Night Time End
Sets the end time for nighttime operation.
Auto Dimmer Setting
Auto Dimmer
Sets the Auto Dimmer function for nighttime operation.
Auto Dimmer Timer
Sets the time period until the backlight turns OFF when the “Auto
Dimmer” item is set to “Auto-OFF” or “Auto-1” to “Auto-3.”
Auto Dimmer Cancel (PTT)
Selects the transceiver operation when [PTT] is pushed while
the Auto Dimmer is activated.
Auto Dimmer Cancel (DV RX)
Selects the transceiver operation when receiving a DV signal
while the Auto Dimmer is activated.
LCD Contrast
Sets the contrast level of the LCD.
RX Call Sign
Selects the call sign and message display option when receiving
a call.
RX Position Indicator
Selects whether or not to display the indicator when the position
data is included in the signal received in the DV mode.
RX Position Display
Selects whether or not to display the caller’s position data in a
dialog when the data is included in the signal received in the DV
mode.

Table of Contents

Other manuals for Icom ID-4100A

Related product manuals