Icom ID-4100A - Page 52

37
4
MENU SCREEN
New2001 New2001
BASIC MANUAL
RX Position Display Timer (Display)
Sets the RX position data display time period.
Reply Position Display
Selects whether or not to display the caller’s position data in a
dialog when the data is included in the Auto Reply signal.
TX Call Sign
Selects whether or not to display My or Your call sign while
transmitting.
Scroll Speed
Selects the scrolling speed of the message, call sign, or other text.
Opening Message
Selects whether or not to display the opening message at power
ON.
Voltage (Power ON)
Selects whether or not to display the voltage of the external DC
power source at power ON.
Display Unit
Set Display units options.
Latitude/Longitude
Selects position format to display the position.
Altitude/Distance
Selects the units to display the distance and altitude.
Speed
Selects the units to display the speed.
Temperature
Selects the units to display the temperature.
Barometric
Selects the units to display the barometric pressure.
Rainfall
Selects the units to display the rainfall.
Wind Speed
Selects the units to display the wind speed.
Display Language
Selects the display language in the DR screen or Menu screen.
When “English” is selected in “System Language,” this setting will
disappear.
System Language
Selects English or Japanese as the system language of the
transceiver.
Sounds
Sets the Sound options.
Beep Level
Sets the beep output level.
Key-Touch Beep
Turns the conrmation beep tones when key is pushed, ON or
OFF.
Home CH Beep
Turns the Home CH Beep ON or OFF.
Band Edge Beep
Turns the Band edge beep ON or OFF.
Scan Stop Beep
Turns the scan stop beep ON or OFF.
Standby Beep
Turns the standby beep function in the DV mode ON or OFF.
Scope AF Output
Selects the audio output option during a sweep.
■ Menu items and their details (Continued)