Icom IP730D - Page 36

6
SET MODE
6-4
The shaded items are also displayed in the Basic Set mode�
L Items or default values may be di󰀨er, depending on the transceiverʼs version or presettings. Ask your dealer for details.
D Common
Set mode items (Continued)
Item Description Option/range Default
Man Down*
2
Selects whether or not to enable the Man
Down function�
The transceiver enters the Emergency
mode when it is tilted past the preset
angle for a certain time. (p. 5-6)
OFF or ON OFF
Lone Worker*
2
Selects whether or not to enable the Lone
Worker function�
The transceiver enters the Emergency
mode when no operation occurs for a
certain time. (p. 5-7)
OFF or ON OFF
Stationary
Detection*
2
Selects whether or not to enable the
Stationary Detection function�
The transceiver enters the Emergency
mode when it is detected as being
stationary (no motion) for a certain time.
(p. 5-8)
OFF or ON OFF
Motion Detection*
2
Selects whether or not to enable the
Motion Detection function.
The transceiver enters the Emergency
mode when it is continuously moves for a
certain time. (p. 5-8)
OFF or ON OFF
Recording Selects whether or not to enable the
Voice Recorder function. (p. 5-9)
OFF or ON OFF
Record Call type*
3
Selects a type of call to record� Individual Call or All Individual
Call
Delete Recording*
3
Deletes recorded audio�
L Select “Clear,” and then push [Call History]
to delete�
– – – or Clear – – –
Noise Canceller Selects whether or not to enable the
Noise Cancelling function�
ON or OFF ON
PTT Lock Selects whether or not to enable the PTT
function�
The function inhibits transmission by the
internal PTT�
OFF or ON OFF
Operate Inhibit Selects whether or not to inhibit the
operation except using [VOL]�
OFF or ON OFF
Sub PTT Push*
4
Sets the function to execute when you
push [Sub PTT]�
Null, Zone, Monitor, Talk Around,
Message, One Touch, or
Surveillance
Null
Sub PTT Hold*
4
Sets the function to execute when you
hold down [Sub PTT]�
Null, Zone, Monitor, Talk
Around, Message, One Touch,
Surveillance, or AquaQuake
Null
*
2
Displayed only when the Emergency Call function is enabled by your dealer.
*
3
Displayed only when “ON” is selected in the “Recording” item.