Icom IP730D - Page 37

6
SET MODE
6-5
Set mode items (Continued)
The shaded items are also displayed in the Basic Set mode�
L Items or default values may be di󰀨er, depending on the transceiverʼs version or presettings. Ask your dealer for details.
D Common
Item Description Option/range Default
Side 1 Push Sets the function to execute when you
push [Side 1]�
Null, Zone, Monitor, Talk Around,
Message, One Touch, or
Surveillance
Null
Side 1 Hold Sets the function to execute when you
hold down [Side 1]�
Null, Zone, Monitor, Talk
Around, Message, One Touch,
Surveillance, or AquaQuake
Null
Side 2 Push Sets the function to execute when you
push [Side 2]�
Null, Zone, Monitor, Talk Around,
Message, One Touch, or
Surveillance
Null
Side 2 Hold Sets the function to execute when you
hold down [Side 2]�
Null, Zone, Monitor, Talk
Around, Message, One Touch,
Surveillance, or AquaQuake
Null
Backlight Selects a Backlight option� Auto, ON, or OFF Auto
Brightness Selects a Backlight brightness option� Light or Dark Light
Contrast Sets the screen contrast� 1 ~ 16 8
Bluetooth Selects whether or not to enable the
Bluetooth function. (p. 5-2)
OFF or ON OFF
BT Auto Connect*
5
Selects whether or not to automatically
connect a Bluetooth device�
OFF or ON ON
BT Sync Vol�*
5
Selects whether or not to synchronize the
Bluetooth headsetʼs volume level with the
transceiverʼs volume level.
L When “ONˮ is selected, the Bluetooth
headset volume can be set by rotating [VOL]�
OFF or ON OFF
BT Connect Type*
5
Selects the Synchronous Connection-
Oriented (SCO) link*
4
connection type of
a Bluetooth headset�
When “Auto Disconnect” is selected, the
SCO link is automatically disconnected
after 2 seconds�
*
4
A Bluetooth link for voice communication�
L This setting is valid only when a Bluetooth
device other than a VS-3 is used�
L When this item is set to “Auto Disconnect,”
the VOX function is not usable�
Always Connect or
Auto Disconnect
Always
Connect
BT PTT & Mic
Switch*
5
Enables the user to select which
microphone to use�
L When this item is set to “Auto,” transmits
the audio from the device whose [PTT] is
pushed�
Auto, Bluetooth Mic, or Radio Mic Auto
BT AF Output*
5
Selects the AF Output device when a
Bluetooth headset is connected�
BT Only or BT & SP BT Only
BT Mic Gain*
5
Sets the Bluetooth microphone sensitivity�
L Higher values make the microphone more
sensitive to your voice�
–12 dB ~ 12 dB (in 4 dB step) 0 dB
*
4
In Dual mode, transmits in Sub mode regardless of the setting�
*
5
Displayed only when “ON” is selected in the “Bluetooth” item.