Icom IP730D - Page 38

6
SET MODE
6-6
Set mode items (Continued)
The shaded items are also displayed in the Basic Set mode�
L Items or default values may be di󰀨er, depending on the transceiverʼs version or presettings. Ask your dealer for details.
D Common
Item Description Option/range Default
BT Echo Canceller*
5
Selects whether or not to enable the
Bluetooth headsetʼs Echo Canceller.
ON or OFF ON
BT E-Cancel Gain*
5
Sets the Echo Canceller input gain for a
Bluetooth headset�
–40 dB ~ 40 dB 0dB
BT E-Cancel Delay*
5
Sets the Echo Canceller delay for a
Bluetooth headset�
0 milliseconds ~ 160 milliseconds 70
milliseconds
BT Noise Cancel
*
5
Selects whether or not to enable the
Bluetooth headsetʼs Noise Canceller.
ON or OFF ON
BT Power Save
*
5
Selects whether or not to enable the
Bluetooth headsetʼs Power Save function.
L When “ONˮ is selected, the Power Save
function automatically activates after 2
minutes of no communication�
OFF or ON OFF
BT One Touch
PTT
*
5
Selects whether or not to enable the One-
Touch PTT function while a Bluetooth
headset is connected�
The function toggles receiving and
transmitting by momentarily pushing
[PTT] on a Bluetooth headset�
L Push [PTT] to talk, and push again to
return to receive�
L When “ON” is selected, you do not have to
hold down [PTT] while you are talking�
OFF or ON OFF
Show BT One
Touch PTT
*
5
Selects whether or not to display the “BT
One Touch PTTˮ item by pushing [FUNC]
on the standby screen�
OFF or ON OFF
BT PTT Beep
*
5
Selects whether or not to sound a beep
when the [PTT] on the Bluetooth headset
is pushed�
OFF or ON OFF
Search BT
Device
*
5
Searches for Bluetooth devices�
L Push [Call History] to start searching.
Search Search
Delete BT Device
*
5
Deletes paired devices� – No Device
Init BT Unit
*
5
Initializes the built-in Bluetooth unit and
pairing list�
– – – or Clear – – –
BT Unit Version
Displays the built-in Bluetooth unit version� – –
RESET Resets the transceiver to its defaults,
except for the Bluetooth pairing list�
L Select “Run,” and then push [Call History]
to reset�
L The transceiver automatically restarts�
NO or YES NO
*
5
Displayed only when “ON” is selected in the “Bluetooth” item.