Distribution Series 3 Dual Bus
855-314-002_Rev2.0_Instruction Manual
Firmware Update
Download the latest Distribution Series 3 firmware file from the ICT website
(ict-power.com/resources/product-firmware/) to a local computer. Select the
"Update Firmware" button to access the Firmware Update page shown
below. Use this page to update the firmware on the unit by clicking the
"Choose File" button to link the downloaded firmware then click the "Update
Now" button. Do not disconnect power to the device during the update
process. The device restarts automatically after the update has been
completed. This will not affect the output power.
Updating the firmware will delete the current log file. Download
the log before updating the firmware.
Send Test E-mail
Select the "Send Test E-mail" button to send a test e-mail to the e-mail
recipients listed on the E-mail Setup page (see Section 4.8).
Ping Diagnostics Tool
Use this feature to verify connectivity of any network connected unit. Enter
the hostname or IP address of the target device, and then click the "Ping"
button to check if the device is active.
To Next Page
Loading...
Need help?
General
