ID Technology 252 - Page 6

Model 252
Label Printer/Applicator
Operators/Technical Manual
4.2.3 Security ________________________________________________ 34
4.2.4 Online/Offline ___________________________________________ 35
4.2.5 Save Setup ______________________________________________ 35
4.2.6 Vacuum Mode ___________________________________________ 36
4.2.7 Print Mode ______________________________________________ 36
4.2.8 Apply Mode _____________________________________________ 36
4.2.9 Recall Setup _____________________________________________ 37
4.2.10 Outputs ________________________________________________ 37
4.2.11 Dwells/Delays __________________________________________ 38
4.2.12 Multiplier ______________________________________________ 38
4.2.13 Back/Cancel ____________________________________________ 38
4.2.14 Enter __________________________________________________ 38
4.2.15 Jog ___________________________________________________ 39
4.2.16 Dual Panel _____________________________________________ 39
5 Application Setup___________________________________________________ 40
5.1 Loading Labels __________________________________________________ 40
5.2 Vacuum Mode ______________________________________________ 42
5.3 Printer Mode _______________________________________________ 42
5.3.1 Normal Mode ________________________________________________ 43
5.3.2 Reverse Mode ________________________________________________ 43
5.3.3 Data Driven Mode_____________________________________________ 43
5.4 Apply Mode ________________________________________________ 44
5.4.1 Tamp Mode __________________________________________________ 44
5.4.2 Tampjet Mode ________________________________________________ 45
5.4.3 Reverse Tampjet Mode _________________________________________ 45
5.4.4 Airjet Mode __________________________________________________ 46
5.5 Setting Online/Offline _____________________________________ 47
5.6 Setting the Label Sensor (Apply Only Module) _________________________ 47
5.7 Air Assist Delay ____________________________________________ 47
5.8 Tamp Dwell ________________________________________________ 48