iDataLink maestro Rr Install Guide

ADS-RR(SR)-VW01-DS
Volkswagen Beetle 2012-2015
Automotive Data Solutions Inc. © 2016
4
INSTALLATION INSTRUCTIONS
AIRBAG WARNING LIGHT
If an airbag warning light turns ON after starting the vehicle
without having the airbag light plugged in, select Clear Airbag
Warning to turn OFF that warning light.
Kenwood Radios:
Main Menu>>Setup>>Sources>>Volkswagen Setup>>Vehicle
Features>>Clear Airbag Warning
Alpine Radios:
Settings>>General>>Idatalink Setup>> Maestro
Module>>Volkswagen Setup>>Vehicle Features>>Clear Airbag
Warning
TROUBLESHOOTING TIPS:
• To reset the module back to its factory settings, turn the
key to the OFF position then disconnect all connectors
from the module. Press and hold the module’s
programming button and connect all the connectors
back to the module. Wait, the module’s LED will fl ash
RED rapidly (this may take up to 10 seconds). Release the
programming button. Wait, the LED will turn solid GREEN
for 2 seconds.
1

iDataLink maestro Rr Specifications

General

Category	Automobile Accessories
Type	Vehicle Interface Module
Compatibility	Works with select vehicles and aftermarket radios
Features	Retains factory features
Functionality	Allows integration of aftermarket radios with factory vehicle systems
Programmability	Programmable via Weblink desktop application
Firmware Updates	Supports firmware updates through Weblink
Data Bus Support	CAN bus
Vehicle Coverage	Compatible with a wide range of makes and models
Additional Features	May include support for factory amplifiers, backup cameras, and more
Installation	Professional installation recommended