iDataLink maestro Rr Install Guide

Automotive Data Solutions Inc. © 2014
6
ALPRRSRGMS05DSOGEN
USING MAESTRO FEATURES
HOW TO GET THERE:
USING MAESTRO
FEATURES
Maestro features can be accessed by pressing and holding the star button on the front of
the radio for 3 seconds. If a feature is not available in your vehicle or it was disabled when
the Maestro module was programmed using Weblink it will not be in the menu. The op-
tions described here may not be available in your vehicle.
GAUGES
Press on Gauges to view the gauges that are selected. Press on the Settings button to select
and confi gure gauges.
Gauges that are supported in your vehicle will be displayed in white text and unsupported
gauges will be displayed in gray text. If a gauge
is displayed in white text with a number next
to it, that gauge is supported and is already
assigned to another position on the screen.
Some gauges have options that can be set. You
will see these appear when you select a gauge
that has options. In order to use some of the fuel
economy gauges, you will need to enter your fuel
tank capacity. This information can usually be
found in your vehicle owner’s guide.
MUTE
3 seconds

iDataLink maestro Rr Specifications

General

Category	Automobile Accessories
Type	Vehicle Interface Module
Compatibility	Works with select vehicles and aftermarket radios
Features	Retains factory features
Functionality	Allows integration of aftermarket radios with factory vehicle systems
Programmability	Programmable via Weblink desktop application
Firmware Updates	Supports firmware updates through Weblink
Data Bus Support	CAN bus
Vehicle Coverage	Compatible with a wide range of makes and models
Additional Features	May include support for factory amplifiers, backup cameras, and more
Installation	Professional installation recommended