To Next PageTo Next Page
Need help?Do you have a question about the IDEATEC POLARIS and is the answer not in the manual?
General| Brand | IDEATEC |
|---|---|
| Model | POLARIS |
| Category | Control Unit |
| Language | English |
Essential safety instructions and warnings for the POLARIS system installation and use.
Guidelines for selecting appropriate wire gauges based on current and length to prevent fire hazards.
Overview of the POLARIS device's key functionalities, automation, and special features.
Illustrates a typical hardware setup for POLARIS systems, showing component connections.
Identifies different touchscreen and FSP console models and their components.
Details the FSP-4K, FSP-6K, and FSP-9K consoles, including wall and housing options.
Identifies modules like OpenLink, UniTherm-HD, VFI, ADI, MFI, EPM-103, cables, and connectors.
Identifies the POLARIS Central Units in S, M, L, and XL sizes and their associated kits.
Instructions for installing consoles using foot mounting, housing, or panel mounting.
Guidelines for installing the POLARIS Central Unit, various interfaces, and bus cables.
Instructions to check the printing scale of drilling templates for accurate installation.
Provides drilling dimensions for Touchscreen and FSP consoles for panel and foot mounting.
Offers drilling dimensions for the POLARIS Central Unit and various interface modules.
Includes drilling templates for FSP-4K, FSP-6K, FSP-9K, ADI, and EPM-103 modules.
Details technical specs for Touchscreen and FSP consoles, including voltage, current, and dimensions.
Lists technical specifications for POLARIS Central Units (Small, Medium, Large, XLarge).
Provides technical data for OpenLink, UniTherm-HD, VFI, ADI, MFI, and EPM-103 modules.
Explains the basic setup and connection logic for POLARIS systems with multiple units.
Details power supply, data bus, positive/negative outputs, and input connections for the Central Unit.
Illustrates how to connect FSP consoles, OpenLink, and other interfaces to the POLARIS bus.
Specifies maximum cable lengths between the Central Unit and connected modules for optimal performance.
Introduces the IDEATEC SpeedFitter software for configuring POLARIS system functions.
Guides on uploading configurations and selecting console addresses for touchscreen and FSP consoles.
Instructions for configuring OpenLink modules and other connected interfaces.
Information about accessing all IDEATEC user guides provided on a CD-ROM.
Details the warranty terms, conditions, and exclusions for IDEATEC products.
