IDEATEC POLARIS - FSP Console Address Selection; FSP-4 K Console

IDEATEC S.A. - Z.I. de Noville-les-Bois - rue Léopold Génicot 19A - 5380 Fernelmont, Belgium - Tel: +32(0)81 42 00 10 - Fax: +32(0)81 57 91 70 - E-mail: info@ideatec.be
User Guide POLARIS V1.0 - Console V1.16 - Module V2.16
Page 54
ON
OFF
SW1
SW2
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
CONSOLE 1
PAGE 1
CONSOLE 1
PAGE 2
CONSOLE 1
PAGE 3
CONSOLE 2
PAGE 1
CONSOLE 2
PAGE 2
CONSOLE 2
PAGE 3
CONSOLE 3
PAGE 1
CONSOLE 3
PAGE 2
CONSOLE 3
PAGE 3
SW1SW2 SW1SW2 SW1SW2
SW1SW2 SW1SW2 SW1SW2
SW1SW2 SW1SW2 SW1SW2
9.
UP
DOWN
9.3 FSP Configuration (continued)
Connecting (continued)
Before installing the FSP console you have to configure which page of touchscreen console you replace.
Behind the console you have some dipswitches to select the address of the console and the number of the page.
9.3.5.1 FSP-4K Console
DIPSWITCH SW1 = CONSOLE ADDRESS SELECTION
ADDRESS 1 : 1=OFF & 2=OFF
ADDRESS 2 : 1=ON & 2=OFF
ADDRESS 3 : 1=OFF & 2=ON
DIPSWITCH SW2 = PAGE SELECTION
PAGE 1 : 3=OFF & 4=OFF
PAGE 2 : 3=ON & 4=OFF
PAGE 3 : 3=OFF & 4=ON
9.3.5 FSP Console Address Selection